Natural Resources Research Articles
Document Type
Article
Publication Date
7-30-2020
Journal Title
Soil Research
ISSN
Print: 1838-675X Electronic: 1838-6768
Keywords
crop management, leaching
Disciplines
Agricultural Science | Soil Science
Abstract
Sulfate sorption by the soil affects the rate of sulfate leaching, which impacts on the availability of soil sulfate for plant uptake. In Australia, plant-available sulfur is measured using 0.25 M KCl heated for 3 h at 40°C to extract soil sulfur (SKCl40). This paper describes a technique referred to as a sulfate buffering index (SBI), which provides a measurement of sulfate sorption. SBI when combined with the estimates of the q and b parameters of the Freundlich equation, can be used to define a sorption curve. The equation is S = acb – q; where S is the amount of sulfate adsorbed (mg S kg–1), c is the equilibrium concentration of sulfate measured in solution (mg S L–1) and a, b and q are coefficients that describe the soil sulfate sorption curve. Coefficients S and c were measured using six sulfate solution concentrations ranging from 0 to 250 mg S kg–1. The adsorption curve was fitted using the modified Freundlich equation including setting of b = 0.41 and q = SKCl40 using recently collected soil samples. The modified Freundlich a coefficient or SBI was calculated as SBI = (S + SKCl40)/c0.41; where S and c were determined using 50 mg S kg–1 of added sulfate. The SBI ranged within 1–40. The SKCl40 was related to SBI below a depth of 10 cm (r2 = 0.71) but not for the 0–10 cm soil layer where S sorption was minimal.
Recommended Citation
Anderson G. C. (2020) Sulfate sorption measured by a buffering index over a range of properties of soils from south Western Australia. Soil Research 58, 651-661. https://doi.org/10.1071/SR20005
